Ceramic Heater 512
Tax included. Free Shipping
Ceramic Heater 512
Sale price£74.99 GBP
Regular price (/)
Specifications
Heat Output: 2000 / 1100 / 900 W
Modes: H1 / H2 / H3 / ECO
Temperature Setting Range: 5-35°C
Temperature Increment: 1°C
Control Method: Touch, Remote
Motor Type: DC
Maximum Warm Air Volume: 148.04 CFM
Maximum Warm Air Distance: 1.40 m
Maximum Cold Air Distance: 3.50 m
Wind Speed: 3.3 m/s
Plug Type: UK
What's in the box
1x DREO Ceramic Heater 512
1x User Manual
1x Quick Start Guide
1x Remote Control
2x AAA Batteries
Frequently Asked Questions
What do the malfunction codes on the LED display mean?
E1 - Temperature sensor open circuit: Unplug it from the power source and contact Customer Support. E2 - Temperature sensor short circuit: Unplug it from the power source and contact Customer Support. FF - Overheat Protection: Unplug and wait for it to cool down before plugging in again. P4 - Tip-Over Protection: Place the heater back on a flat, level and stable surface.
Why doesn't my heater start?
1. Make sure the power cord is properly connected to a powered electrical outlet. 2. If overheat protection has been activated, unplug the heater and allow it to cool, then remove any objects on or near the heater. 3. Ensure that your circuit breaker or fuse is working properly, and that the heater is placed on a flat and even surface. 4. Ensure that the temperature is set to be higher than the ambient temperature.
Why does my heater suddenly stop during heating?
1. If the temperature exceeds the threshold of the thermal cutoff, turn off and unplug the unit. Allow it to cool and plug into the electrical outlet again. 2. If the heater is tipped over, place it on a flat, level and stable surface. 3. In ECO mode, the heater will turn off automatically when the set temperature has been reached. This is normal. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode.
You may also like
